LEVEL IV STAND ALONE HARD ARMOR PLATE 10×12

489.99$

SKU: PL-4SAFD Categories: ,

Description

  • Ultralight PE+Ceramic Composite Hard Armor Plate.
  • Only 6.0 lbs Plate Defeating Multiple Armor Piercing Rounds.
  • Tested at NTS Chesapeake Laboratory.

Ace Link Armor Level IV Hard Armor Plate is a composite plate utilizing highest grade UHMW Polyethylene backing enhanced by silicone carbide ceramic on the strike face of the plate. Thanks to this unique construction first biggest impact is dispersed on the surface of ceramic while PE backing absorbs rest of the energy and effectively catches the bullet.

Level 4 Hard Armor Plate from Ace Link Armor is capable of stopping multiple rifle rounds up to powerful .30-06 APM2.

Our plates come with 5 years full warranty.

 

Level IV Hard Armor Plates are available in 10×12″ size only.

Plate is 0.90″ thick.

Single plate weight is 6.0 lbs – what does your steel plate say about this ?!

Ballistic Testing Report from NTS accredited laboratory is attached to each shipment so you can rest assured plates will perform as designed when you need it.

SAVE ON WEIGHT AND BE SAFE FROM SPALLING

At only 6.0 lbs this  composite plate is capable of stopping multiple armor piercing rounds. Silicon Carbide ceramic disperses impact energy effectively, without risk of dangerous spalling. Protection against armor piercing .30-06 APM2 rounds has never been so light and risk-free. 

EXTENDED CERAMIC COVERAGE

Increased protection area provided by ceramic ballistic plate – choose Ace Link Armor plates with Extended Ceramic Coverage for the most comprehensive protection of your vitals. There is no compromises when it comes to your safety!

STAND ALONE

This plate is capable of stopping multiple AP rounds by itself! IIIA backing panel is not required. Stand Alone protection at it’s finest!

EDGE-TO-EDGE PROTECTION

Ballistic structure designed and manufactured to provide fullest possible spectrum of protection against rifle threats

WEIGHT ONLY
6.0 LBS

Extremely durable yet incredibly light! This plate is significantly lighter then any steel plate of similar configuration and protection.

Will this plate stop AP rounds?

Yes! Our plate meets level 4 NIJ standards and can stop black-tip as well as .30-06-cal. APM2.

What advantages does your plate offer over a similarly priced steel plate?

Steel plates have several disadvantages such as spalling and increased weight. Running a set of our Level 4 plates will weigh in for a total of around 11 pounds not counting the rifle and any other gear a person may carry. A similar set of steel plates could EASILY run 15-18 pounds, the weight savings you get by going with Ace Link Armor are enormous.

What types of cut do you offer?

We offer standard 10×12 SAPI cut for our LEVEL 4 plates

Where are your plates tested?

All our plates are tested In independent NIJ certified laboratories such as OBL and NTS Chesapeake, testing reports are available upon request.

What are typical lead times on these plates?

If our plates are in stock they typically ship out within 24hours, when out of stock, lead time is usually 2-3 weeks.